Blog

Tech packsclothink

Can AI Turn a Fashion Sketch Into a Tech Pack? A Jacket Example, Step by Step

  • AI design
  • Software

Part of the fashion tech pack guide: what a tech pack is, what goes inside and how to write one.

A coloured sketch of a cropped purple leather jacket, the same jacket as a photoreal product shot, and two pages of its tech pack

Yes, as a first draft. Give clothink a sketch, or a photo of a garment, and Auto-Complete drafts the tech pack: a bill of materials, a graded size chart, How to Measure lines and construction notes. A person still has to check it before it goes to a factory.

What AI fills in from a sketch, and what you still check

This is how it split on the jacket below:

  • Filled in: the materials and bill of materials, a size chart graded from XS to 3XL with a tolerance on each point of measure, How to Measure lines drawn on the front and back flats, and construction notes with numbered call outs pinned to the sketch.
  • You check: what a drawing can’t settle, such as how thick the leather is, which hardware fits which strap, what holds a big shoulder in shape and inside seams.
  • Still open: what only the brand or the factory knows, such as the tannery, suppliers, signed-off swatches and lab dips, plus the pattern and the fit sample. clothink doesn’t make sewing patterns.

A clear drawing is the best starting point, and a photo works too: letting clothink draw front and back flats first gives more accurate measurements. This jacket started from a written brief, so the first stage below is clothink drawing the sketch; with your own sketch, you upload it in that stage instead.

We started with a written description of a purple leather jacket.

From that brief, clothink drew the sketches and technical flats, made photoreal mockups and drafted a tech pack, all in the same workspace. We then reviewed the pack the way a leather factory would read it, tightened the leather and hardware specifications, and exported the 13-page version shown here.

This post follows the jacket through each stage, so you can see how one design carries from an idea to a document a factory can quote from.

Disclosure: clothink publishes this post. The jacket is an illustrative design, made in a clothink demo workspace in October 2026. Every picture is an AI-generated output, not a photograph, and the jacket hasn't been sampled.

The brief

We picked a leather jacket because it's full of details a picture can't settle: how thick the leather is, which hardware fits which strap, and what holds a big shoulder in shape. This was the brief:

“Womenswear SS27 pilot jacket in electric purple lambskin nappa leather: exaggerated strong extended shoulders, boxy body cropped at the waist, oversized notch collar with wide lapels, off-centre silver metal zip, two near-vertical zip pockets at the waist, self-fabric belt at the hem with a square silver buckle, knit rib cuffs in matching purple.”

From a written brief to sketches and flats

From that brief, clothink drew a coloured sketch. We then generated a matching back view and turned both into black-and-white technical flats, the clean line drawings a factory works from.

The pilot jacket as a purple coloured sketch, a black-and-white technical flat of the front and a technical flat of the back
The coloured sketch and the front and back technical flats.

Everything after this point follows the approved drawing: near-vertical zip pockets at the waist, a belt at the hem and rib cuffs. If you want to change a detail like that, Precise edit lets you tap it, say what to change and compare before and after, without redrawing the rest of the jacket.

Photoreal mockups

Next, the sketches became photoreal mockups: the jacket on a model in a rainy street, a product shot and a back view, plus close-ups of the collar, the buckle and the cuff.

The purple leather jacket as AI-generated photoreal mockups: from the back on a model in a wet city street, as a product shot, a worn close-up of the belt, and close-ups of the collar, belt buckle and rib cuff
Photoreal mockups made from the sketches, with close-ups of the collar, buckle and cuff.

The off-centre zip, the belt and buckle, the waist pockets and the rib cuffs agree across the front, the back and the close-ups. What a mockup can't tell you is how leather of a given thickness will hang or how the jacket will fit. Only a physical sample shows that. Our guide to the AI fashion mockup generator covers this step in more depth.

Drafting the tech pack from the same design

In clothink, a style keeps a garment's sketches, mockups and tech pack together, so the pack starts from the drawing you approved rather than a fresh upload. We started a tech pack from the mockup and sketches and ran Auto-Complete. In one run it drafted:

  • Materials and the bill of materials: the leather shell, rib cuffs, a viscose twill lining and cotton pocket bags, plus the zips, buckle, eyelets, threads, labels and packaging.
  • A size chart: graded from XS to 3XL, each point of measure with a tolerance.
  • How to Measure: each point drawn on the front and back flats.
  • Construction notes and call outs: notes from the collar to the belt, with numbered call outs pinned to the sketch.

Every section stays editable. For how each section is drafted, see what an AI tech pack is.

Four pages of the jacket's reviewed tech pack: call outs on the sketch, construction and finishing notes, the size chart and the How to Measure diagram
Four of the 13 pages after review: call outs, construction notes, size chart and How to Measure.

Reviewing it for a leather factory

Auto-Complete gave us a complete first draft. Before export we reviewed it the way a leather factory would read it, as you should with any first draft, whoever writes it. For a leather jacket, these are the parts that decide whether a factory can quote and cut it.

The leather is specified by thickness, not weight

Fabric is bought by weight. Leather is bought by area and specified by thickness. The pack now gives full-grain lambskin nappa at 0.7 mm, plus or minus 0.1 mm, with a semi-aniline finish and a selection grade for the visible panels. The tannage is still to confirm with the tannery. It names a signed-off physical swatch for each colourway as the colour standard, because leather can't be matched to a screen colour. The rib and lining are lab-dipped against that swatch.

It also says how to cut: shade-sort the skins, cut every panel of one jacket from one dye lot, and cut left and right pairs from the same or neighbouring skins, with the best grain on the fronts, collar and belt. Without that, a jacket can come back with two fronts that don't quite match.

The hardware fits together

The belt is 4.5 cm wide, so the buckle has to clear it. The pack specifies a 45 mm square buckle with at least 46 mm inside, to be confirmed on the physical buckle with the actual belt, because a nominal buckle size doesn't tell you the real clearance. That's one place the first draft needed a change: it had listed a 40 mm buckle.

The front zip is ordered per size to match the size chart, from 43.5 cm in XS to 49.5 cm in 3XL, and both zips carry the right tape colour for each of the three colourways.

The trims page of the bill of materials: front zip ordered per size, pocket zips, square buckle with its inside clearance, eyelets, leather fusible, stay tape, shoulder pads, belt stiffener and leather adhesive
The trims in the reviewed bill of materials.

The structure behind the look

Exaggerated, extended shoulders don't hold in soft lambskin on their own, so the pack adds shoulder pads and a sleeve head roll. It adds a low-temperature leather fusible for the collar and facings, and stay tape on the edges that stretch, such as the shoulders, neckline and zip edge.

Leather is handled differently from cloth, so the notes say so. Seams are opened with adhesive and flattened with a hammer or roller rather than pressed with steam, and visible topstitching isn't back-tacked.

Every measurement has a defined path

The size chart now has 18 points of measure, including belt length, lapel width and collar height. Each one says where the tape goes. The collar, for example, is measured along its outer edge with the collar laid flat, from one collar point round the back neck to the other. Treat the values as starting points for the first fit sample, not final sizing.

What's still open

This is a prototype pack, built to get a first sample and a quote. Some decisions rightly stay open until then:

  • the tannery, the leather article and the signed-off swatch for each colourway
  • the physical buckle, zips and eyelets, checked together with the belt
  • lab dips for the rib and lining
  • the pattern: clothink doesn't make sewing patterns, so a pattern cutter or your factory does
  • the fit sample, which confirms the length, the sleeve with the extended shoulder and every value in the size chart
  • consumption and cost, which come from the factory's marker and quote

Why one workspace matters

The sketch, the mockups and the tech pack in this post are one style. The drawing we approved is the drawing the pack was built from, and when a detail changes, the pack is in the same place. In most set-ups those stages live in an image tool, a spreadsheet and an email thread, and each handover is a chance for the jacket to change by accident.

If you're comparing tools, see our guides to the best AI fashion design tools and the best tech pack software. Before you send your own pack, our guide to writing a tech pack factories will quote from is a useful checklist.

What does it cost?

  • Free plan: no card, 10 starter tokens, and up to 3 active tech packs you can make and edit. A sketch or a standard mockup usually costs 1 token. Your first Auto-Complete run is free, then it's 3 tokens a run.
  • Exporting: to download a pack as a PDF and Excel file, unlock that pack once for £15, or choose a paid plan.
  • Paid plans: from £19 a month, with monthly tokens, every export and Auto-Complete included. See clothink pricing.

Take your own design from sketch to tech pack

Start on the Free plan with no card. Make and edit up to 3 active tech packs, then unlock one for £15 or choose a plan when you're ready to export.

Frequently asked questions

Can AI turn a fashion sketch into a tech pack?

Yes, as a first draft. In clothink you can upload your own sketch or a photo and run Auto-Complete on it. For a photo, letting clothink draw front and back flats first gives more accurate measurements. Details an image can't show, such as inside seams, still need checking.

Can I edit measurements and construction details after the AI drafts them?

Yes. Every section of a clothink tech pack stays editable: you can change bill of materials rows, size chart values and construction notes, and drag How to Measure lines to where they should be.

Is this jacket's tech pack ready for production?

It's ready for a first sample and a quote. It isn't approved for bulk: the leather swatch, trims, lab dips and fit sample are still open, as they are for any prototype pack.

Does AI fashion design software make sewing patterns?

clothink doesn't. It drafts the tech pack that a pattern cutter or factory works from, and it doesn't simulate fit or drape. Pattern-based 3D tools such as CLO are built for that.

Can I make a tech pack for free?

Yes. On clothink's Free plan you can make and edit up to 3 active tech packs with no card. Downloading the PDF and Excel files needs a £15 unlock for that pack or a paid plan.

What file formats does the tech pack export to?

A PDF for the factory and an Excel workbook laid out like the PDF, with the sketches, call outs and size chart included.

What do I need to turn a flat sketch into a tech pack?

A drawing of the garment. If you only have a front view or a photo, clothink can draw front and back flats first, which gives more accurate measurements. Then run Auto-Complete and review each section.

What does AI leave out of a tech pack made from a sketch?

What only the brand or the factory knows. Suppliers, label artwork and colour references stay blank for you to fill in, and the pattern and fit sample still come from a pattern cutter and your factory. clothink doesn’t make sewing patterns.

How much does it cost to turn a sketch into a tech pack?

On clothink’s Free plan your first Auto-Complete run is free, then it’s 3 tokens a run. You can make and edit up to 3 active tech packs with no card. Downloading the PDF and Excel files needs a £15 unlock for that pack or a paid plan, which includes Auto-Complete.

  • A tech pack size chart sheet behind a technical specification sheet showing a pullover hoodie flat sketch with eight numbered call outs

    Tech packs

    Best AI Tech Pack Generators in 2026: 5 Tools Compared

    Five AI tech pack generators compared on what they produce, what one finished pack costs and what a factory still has to check. Our pick for independent fashion brands is clothink, with when each alternative fits better.

  • A sand-coloured cotton twill utility vest laid flat on an oak table with a tape measure, zip, trim swatches and printed technical drawings of the vest

    Tech packs

    Best Tech Pack Software for Fashion Brands in 2026

    The best tech pack software in 2026 compared: clothink, Techpacker, Tech Pack Wizard, AI tech pack generators, CLO-SET, Rechain, Onbrand and enterprise PLMs, on price, free plans, exports and factory sharing. Checked 7 November 2026.

  • Large lilac “PLM?” on a dark purple background, with the line “Do small clothing brands really need it?” and the clothink logo

    Product development

    Fashion PLM Software for Small Brands: Do You Really Need It?

    Work out what is slowing your clothing brand down before you buy PLM. Techpacker, Rechain, Delogue, Onbrand, clothink and spreadsheets compared, with published prices, a two-person cost table and a test to run on one real garment.